Conference wireless screen casting system:

The Lemorele conference screen casting system is designed to easily transmit conference content wirelessly from a laptop or other device to a conference all-in-one, projector, or TV via an HDMI transmitter and receiver.The transmitter and receiver are independently networked for high-quality screen casting without the need for a wireless network, eliminating the need for cumbersome cables.

Organiser and power supply:

The Lemorele G500 storage box provides 2 compartments for storing the HDMI transmitter, when the HDMI transmitter is back to the charging compartment it can start charging, it supports positive and negative insertion. And through the intelligent chip control, it can achieve over-current, over-voltage, overload protection, and automatic stop when fully charged (when the transmitter is fully charged in the charging compartment 4 indicator lights will be always on at the same time, so that you can easily check the power level when you are ready to use it).

Transmission Distance:

The Lemorele G500's transmitter and receiver are both equipped with 2.4G/5G high-performance Wi-Fi modules, enabling transmission over a straight line distance of 50 metres from the transmitter to the receiver, a distance that can usually meet the needs of, for example, university classrooms, as well as large-scale corporate meetings with wireless screen casting.

HDMI Transmitter with 2000mAh:

Usually HDMI transmitter needs external power supply to start working.Lemorele HDMI transmitter comes with 2000mAh lithium-ion battery pack, which can provide 3.5-4 hours of meeting time for HDMI transmitter. No power cable is needed to make it truly wireless.

Simultaneous use and clarity of multiple transmitters:

Usually there are multiple computers that need to cast screen in a meeting scenario, Lemorele G500 supports 8 transmitters to be used at the same time, which can be switched by pressing the button. One-button connection. While supporting 8 transmitters the resolution is still at 1080P60hz, this resolution is usually fully sufficient for projectors or whiteboards or TVs up to 200 inches.

Packing list and more services:

1* Charging Dock

1* Wireless Transmitter ;

1* Wireless Receiver ;

1* User Guide ;

1* Nano 3M Adhesive Pad;

2* 100cm USB-C Cables.

A few tips about the Lemorele G500

1. Why does the HDMI transmitter need batteries?

The HDMI connector on your computer usually does not provide enough power to drive the transmitter. Therefore, extra batteries are required to ensure that it works properly.

2. Why don't HDMI receivers have batteries?

An HDMI receiver is a stationary device that is usually connected to a power source via a USB cable. Since it usually stays connected, no batteries are required.

3. How long does it take to fully charge in the charging case?

Typically, it takes about 3 hours for the transmitter to fully charge in the charging case.

4. How do I check the battery level?

When the transmitter is switched on, each indicator light represents 25% of the battery level.

5. What is the wireless range?

The Lemorele G500 has a wireless range of up to 50 metres.

6. How do I switch on the transmitter?

Press and hold the power button for 2 seconds to switch on the transmitter; press and hold the power button for 7 seconds to switch off the transmitter.

7. Can it power a computer?

No, the Lemorele G500 cannot power a computer.